Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 30
mpc 2500 s.c. 360
after changing out the black toner motor the day before we started getting sc 360 any clues.
-
Technician
- Rep Power
- 0
Re: mpc 2500 s.c. 360
The error is Black TD sensor.
Check toner supply (can be done in 5-804 output) make sure Toner is getting through.
Try a new K PCU (dev unit included).
Check to make sure you have the Toner motor installed properly, no crimped wires etc...
Why did you have to change the Toner motor to begin with?
-
Trusted Tech
50+ Posts
- Rep Power
- 30
Re: mpc 2500 s.c. 360
the machine was not adding black toner. after we changed the motor it added toner and started to work.
-
Re: mpc 2500 s.c. 360
If blk dev unit doesn't fix problem could be I'd sensors are dirty or on transfer assy top roller bar is dull and needs to be buff or replaced or transfer belt is worn. I'd sensors shine through transfer belt on to bar and then back. I would try blk dev unit first.
-
Re: mpc 2500 s.c. 360
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks