Canon IR 600 Error Code E015

[Guest]

I had an electrician wire in my IR600 and apparently just looked at the plug and not the spec panel. Wiring in a 240 line into a 120 machine. Turn it on and it started to smoke. Immediately killed power and realized the issue. Upon fixing the issue and plugging back in I am receiving Error E015.

Does anyone know what this is, how to fix, etc?

Any help is greatly appreciated.

Thanks
Brian

[smiley]

hi its pick up motor (m2).but i think its dc controller already damage by wrong input of voltage.change m2 if not solve change dc. good luck

[BLITZKREAGG]

ir 600

Title : E012 and E015 Error Codes Problem :
Still Getting E012 and E015 after following the troubleshooting guide in the service manual.


Solution :
Check MSW5 Microswitch. This switch is for the Manual feed tray cover open/close detection or PS56 Sensor. PS56 is also for the Manual feed tray open/close detection.