[Error Code] E602-0001

[Guest]

Dear All,
I have problem with IR5570 with E602-0001 .
Please let me know how to solve this Error code?
Where can I download firmware for IR5570?
Which cable do I use to connect to my copier? and how to use Canon SST?

Thank you in advance please contact me at
My email: anissack@gmail.com

Anissack

[gensys]

Re: E602-0001

Dear All,
I have problem with IR5570 with E602-0001 .
Please let me know how to solve this Error code?
Where can I download firmware for IR5570?
Which cable do I use to connect to my copier? and how to use Canon SST?

Thank you in advance please contact me at
My email: anissack@gmail.com

Anissack

Read This >>>>>

[DAG COPIERS & COMPUTERS]

Re: E602-0001

E602-0001 is HD-related error.
There are many threads posted on this forum in connection with this particular problem/topic.
- My advice to you is to spend sometimes to PERUSE through the forum Archive and you will be able to dig and come up with a wealth of information on this topic, with the suggested PRACTICAL SOLUTIONS offered, which has helped many people including techs. Take your time, and you will really learn a lot.

- Otherwise, the following HINTS should be useful:

-E602-0001: A HDD mount error was detected when the HD was started up.
-Check the faulty connection between the HDD and the main controller PCB.
-Poor HDD: Replace the HDD, and reinstall system software.
-Poor main controller PC: Replace the Main controller PCB.

[Jamesu]

Re: E602-0001

I agree with above.

Read through the forum, even at problems you've never had - that way you're well equipt for when that problem arises! I had a problem only the other day and immediatly remembered i saw the answer on here the night before!

[teckat]

Re: E602-0001

Try this HD CHECK FIRST >
Power off printer > hold down the '1' and '9' keys on the keypad >while holding down keys >power up printer with other hand >hold until you see a flashing white block , it will show in the top left corner of the LCD.

Normally, 'HD-Check' lasts about 15-20 minutes, and ends if no fault is encountered or specific sectors have automatically been repaired bringing up DOWNLOAD MODE on the LCD.

DO NOT STOP ONCE STARTED.In certain cases,"HD-Check" can take longer than 15-20 minutes and sometimes the machine can hang in this mode and will never complete.


if this does not work-u need a new HDD