[Misc] Konica Minolta C224e Error Code C-2650

[mearmi]

Konica Minolta C224e getting Error Code C-2650.

When we reset/clear error in service mode (Initialization). Machine reboots and working fine.

And once switch off and on back the same error appears again.

Please advise.

Thanks

[Woxner]

[copyman]

Re: Konica Minolta C224e Error Code C-2650

Remove the SSD and reseat. Push SSD in tight while tightening screw

[mearmi]

Re: Konica Minolta C224e Error Code C-2650

Remove the SSD and reseat. Push SSD in tight while tightening screw

I couldn't find the SSD.

Please find the attached photo.

Thanks

[Bix]

Re: Konica Minolta C224e Error Code C-2650

I don't seem to see it.ssdb1.jpg

ssdb2.jpg

[copyman]

Re: Konica Minolta C224e Error Code C-2650

SSD is behind the HDD on that model. It would never boot up if missing!

[allan]

Re: Konica Minolta C224e Error Code C-2650

Guess they make them different...
Never seen this layout?

[tsbservice]

Re: Konica Minolta C224e Error Code C-2650

SSDB is behind HDD on non e-series and over the memory sticks on e-series. This machine should be non-e, is my guess.

@mearmi, if machine is C224 there is FW ver. GA8-K5 that amongst other improvements has this:
- The troublecode C-2650 may occur after starting the MFP by turning a main power switch off/on or returning from powersave mode.

[mearmi]

Re: Konica Minolta C224e Error Code C-2650

SSDB is behind HDD on non e-series and over the memory sticks on e-series. This machine should be non-e, is my guess.

@mearmi, if machine is C224 there is FW ver. GA8-K5 that amongst other improvements has this:
- The troublecode C-2650 may occur after starting the MFP by turning a main power switch off/on or returning from powersave mode.

It is e version. Returning from power save mode it is working fine.

[femaster]

Re: Konica Minolta C224e Error Code C-2650

It is e version. Returning from power save mode it is working fine.

If you are 100% certain it's an e model, then someone has done something to modify this copier.

SSD board location / removal taken from C224e service manual:
C224e.jpg

SSD board location / removal taken from C224 service manual:
C224.jpg
No matter if you believe this to be a C224e model or not, that board belongs to a C224, there is no way around that. SSD is behind the HDD. Oh, and in your picture, the HDD is disconnected, had you already looked behind it?