I purchased a Konica Minolta Bizhub C220 from a company closing it's doors due to COVID.
I'm an end-user, not a technician, but I setup network systems, so believe I can handle some of what I need to do to get this copier working.
I've set it up in my home office, because now I'm working from Home due to COVID, and thank full I still have a job.
The unit has:
DF-617 Reverse Automatic Document Feeder
EK-604 Local Interface Kit
PC-207 Paper Feed Cabinet
SD-509 Saddle Sticher
FS-527 Finisher
PK-517 Punch Kit
JS-603 Job Separator
Question:
Thanks in Advance
Dan Marr
I'm an end-user, not a technician, but I setup network systems, so believe I can handle some of what I need to do to get this copier working.
I've set it up in my home office, because now I'm working from Home due to COVID, and thank full I still have a job.
The unit has:
DF-617 Reverse Automatic Document Feeder
EK-604 Local Interface Kit
PC-207 Paper Feed Cabinet
SD-509 Saddle Sticher
FS-527 Finisher
PK-517 Punch Kit
JS-603 Job Separator
Question:
- I've seen several "Installation" sheets, on this web site, that have 10 to 20 pages to them. These appear to be for initial setup of the printer. I've downloaded some 20 manuals from Konica Minolta's web site, and have Parts manual and Service manual. Are there individual Installation sheets for the various above parts that I should be looking for?
- The Paper Feed Cabinet has 11 x 17 paper in Tray 3, but every time I print, It always says it's A3 paper. I thought I set this up using the printers web interface, but I always have to override this when I print. I've looked for a manual on the control panel and how to use it, but Can't find one...How do I set this up?
Thanks in Advance
Dan Marr
Comment