Baron 8110s - Please call service?

[fatfingers73]

Hello all,

My colleague has just fitted a 600k and 1200k PM kit to this device.

SC5501 PM alarm has been turned off.

There nothing exceeding target yield.

Still flashing up "Please call service" with a telephone icon.

What have we missed please?

Cheers

[Vollegaaz]

Re: Baron 8110s - Please call service?

check WIM, there you'll be informed what's wrong, probably the ITB bias roller indication, seen that often popping up since the last firmware update.
Check SP2324, flag should be 0, when not reset in the next sp (after replacing the roller offcourse)

first time i issued that...got me sweet for a couple of hours....

[fatfingers73]

Re: Baron 8110s - Please call service?

Thanks for that

It was 2324.

check WIM, there you'll be informed what's wrong, probably the ITB bias roller indication, seen that often popping up since the last firmware update.
Check SP2324, flag should be 0, when not reset in the next sp (after replacing the roller offcourse)

first time i issued that...got me sweet for a couple of hours....

[Vollegaaz]

Re: Baron 8110s - Please call service?

Thanks for that

It was 2324.

you're welcome