RICOH training

[karlmweru2020]

Hello everyone.
I come to the community to present this little problem that has worried me.
By the way, sincerely speaking, without wanting to offend anyone, I would like if someone can know an internet link where I can take a training in photocopiers range RICOH.
I would like to have it for photocopiers and RICOH duplo if possible.
Would anyone have an idea of what might be a solution for me?

[freginold]

Re: RICOH training

Online Ricoh training is generally only available via their online learning website, which you have to be a Ricoh-certified technician or manager to access.

[JaysOnTheEDGE]

Re: RICOH training

Ricoh Tech here, the online classes we have basically tell you to read the service manual and detailed descriptions section as "training". I've been a tech for a year and this is how I learned most stuff. Other knowledge can only be gained with experience or in my case I lean on my senior techs.

Sent from my SAMSUNG-SM-G530AZ using Tapatalk

[zed255]

Re: RICOH training

Ricoh's training has been steadily degrading through the years. In my current opinion the Ricoh Learning Institute is a waste of internet bandwidth. Basic training is still instructor led following an online portion and might be good for someone totally green or working with Ricoh products for the first time, otherwise little value.

[Iowatech]

Re: RICOH training

I guess this doesn't work anymore:

How about a cup of coffee.jpg

Looks like I've been out of the loop for a while.

[DDlan]

Re: RICOH training

Ricoh Tech here, the online classes we have basically tell you to read the service manual and detailed descriptions section as "training". I've been a tech for a year and this is how I learned most stuff. Other knowledge can only be gained with experience or in my case I lean on my senior techs.

Sent from my SAMSUNG-SM-G530AZ using Tapatalk

i think if you can understand anything in this wed you are very good.

[slimslob]

Re: RICOH training

I guess this doesn't work anymore:

[ATTACH=CONFIG]35848[/ATTACH]

Looks like I've been out of the loop for a while.

It has been replaced by this: Ricoh Learning Institute

You still need to be a registered tech for a Ricoh branch or authorized dealer.

[freginold]

Re: RICOH training

I guess this doesn't work anymore:

[ATTACH=CONFIG]35848[/ATTACH]

Looks like I've been out of the loop for a while.

Still got mine, too!

[Phil B.]

Re: RICOH training

Still got mine, too!

the dealer I worked for was tooooooooo cheap to send ANY of us to formal training.

[mikadonovan]

Re: RICOH training

I guess this doesn't work anymore:

[ATTACH=CONFIG]35848[/ATTACH]

Looks like I've been out of the loop for a while.

Another oldie.

[MitchD]

Re: RICOH training

Pretty sure I have one of those floating around my office somewhere. After 18 years at the same dealership you tend to collect shit.

Another oldie.

[maxy1982]

Re: RICOH training

Dear All,

I want to know if you charge your lease click clients for replacement of controller board

Regards,
Maulik Shah

[Polarbear]

Re: RICOH training

Dear All,

I want to know if you charge your lease click clients for replacement of controller board

Regards,
Maulik Shah

Maxy1982

It is best to start your own thread when you want to ask a question, and not to piggyback onto another thread.

[Maher]

Re: RICOH training

Ricoh's training has been steadily degrading through the years. In my current opinion the Ricoh Learning Institute is a waste of internet bandwidth. Basic training is still instructor led following an online portion and might be good for someone totally green or working with Ricoh products for the first time, otherwise little value.

I have to agree with you , I have 121 RICOH certification andit is all about non-since . As you said , it ask you to memories the FinisherType or the part number for the Drum ???.
No real Troubleshooting tips

[fshead]

Re: RICOH training

Dear All,

I want to know if you charge your lease click clients for replacement of controller board

Regards,
Maulik Shah

WHAT A TOOL