Ricoh MP C4500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • iscott
    Trusted Tech

    250+ Posts
    • Mar 2010
    • 344
    #1

    Ricoh MP C4500

    Well whats up with this happens every once in a while
    I have just replaced the black PCU and vacumed the cleaning unit (it was in pretty good shape)
    This particular copy was a fax coming thru and it put the cyan and black splotch on it. Porter prob.jpg
    Tags: 500, black, c450, c4500, copy, cyan, good, id sensor, pcu, ricoh, unit
    • pbbsinc
      Technician

      Site Contributor
      50+ Posts
      • Nov 2005
      • 90
      #2
      Transfer Cl Unit (clean / replace). The marks are probably due to the blade not cleaning the ID sensor patches off of the belt (this is why it only happens once in a while)

        Comment

        • Herrmann
          Senior Tech

          Site Contributor
          500+ Posts
          • Jan 2006
          • 792
          #3
          check pm counter in service mode, if you are over 500k for the transfer unit, replace the whole assy, but keep in mind to order the transfer unit for the spc 811, its much cheaper, the only thing you have to do, is to interchange the upper plastic covers to make it fit
          If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

            Comment

            Previous template Next
            Working...