Problem In Printing Ricoh Mp c6000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Guest
    #1

    [Misc] Problem In Printing Ricoh Mp c6000

    I Have a customer work with a network and using "SAP" Program to his business
    are there any way to force this program to print black and white with out using the CYM colors

    I told the customer to configure the driver to print on black and white mode not color but the printer still tack toner from the other colors

    1- is that possible to configure the driver as a black an
    2-If this can be how to stop printing from the other color and force this printer "Mp C6000 " to use the Blacke toner only

    thank you

    Ahmed
    Tags: None
    • Tonerbomb
      AutoMajical Resolutionist

      Site Contributor
      2,500+ Posts
      • Feb 2005
      • 2589
      #2
      Re: Problem In Printing Ricoh Mp c6000

      If the driver on the users PC is defaulted to B/W and they still print in color from Their SAP program, They need to configure the printer in the SAP program. They may need to contact their support for the SAP application......

      The machine will ALWAYS use some color toner because it uses all colors for process control and line position and color calibration..............
      Mystic Crystal Revelations

        Comment

        • KenB
          Geek Extraordinaire

          2,500+ Posts
          • Dec 2007
          • 3945
          #3
          Re: Problem In Printing Ricoh Mp c6000

          Originally posted by Tonerbomb
          If the driver on the users PC is defaulted to B/W and they still print in color from Their SAP program, They need to configure the printer in the SAP program. They may need to contact their support for the SAP application......

          The machine will ALWAYS use some color toner because it uses all colors for process control and line position and color calibration..............
          SAP doesn't use drivers, but rather "device types".

          Sometimes using a B/W only device type will help cut down the color clicks, in this case perhaps the MP6000 (not a color machine).

          You can't supply the customer with this, the customer must get it from their SAP vendor, as a support contract is normally required.

          Ricoh (or any other printer vendor) does not write the device types, SAP does.
          “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

            Comment

            • allan
              RTFM!!

              5,000+ Posts
              • Apr 2010
              • 5459
              #4
              Re: Problem In Printing Ricoh Mp c6000

              Try using Hp PCL driver
              Whatever

                Comment

                • Guest
                  #5
                  Re: Problem In Printing Ricoh Mp c6000

                  Thanks for all for help


                  Instead of using MP c6000 driver i suggest to use MP 6000 driver, and in this driver there is no color option
                  and now the problem solved

                  " my be they use this option " this suggest from allan to use HP PCL
                  or like KenB said they use device type

                  Tonerbomb you are right in line position and color calibration.............the machine with use the color but not in printing

                  Thank you

                    Comment

                    Previous template Next
                    Working...