CLS-9201 "Firmware update in progress..." message on black screen and nothing else

[crm-informatica.it]

Hello to all,
I have this CLX-9201 where I updated the firmware.... but the during the update process it was locked at 95% for about 6 hours...
So I turned it off and now there is the message "Firmware update in progress" after the Samsung logo on boot.
I can run the Syncthru via web page and I can upload the firmware updates via SyncThru too (and I think that I should print to it).
But the OP is inacessble because the message.
I tried to press "*" + "0" + "#" and it goes to downlaod mode but I cannot do anything.
I tried to run this "download mode" with "UI Recovery V5.16.00.33.00_2015022623.hd" file into an USB pen; or "EV11.11.15.03_FS11.01.00.00.75.ehd" file, or "CLX-92x1 93x1 Series_V6.P6.03.EC1512.10.hds" but it seems that doens't happens nothing.
Is there anybody that can help me please?
Thanks in advance
Ciao!

[crm-informatica.it]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

I made a mistake on the object of this thread. Of course the title is about to CLX-9201
I verified that the UI firmware update gone wrong. Only it.

[wav]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

Hi you may need to install a new hdd and install the firmware to it.

i do have the firmwares for lots of Samsung's.

[crm-informatica.it]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

Hi you may need to install a new hdd and install the firmware to it.

i do have the firmwares for lots of Samsung's.

Hi "wav". Thanks for your reply.
I solved the problem replacing the OP. But I tryed the replacement of the HD too (I can get it from another CLX-9201).
To install a new HD I need some files that I don't have.
I tryed to install a new HD too, but the files "UI Recovery V5.16.00.33.00_2015022623.hd" didn't recognized; the files "System Recovery CLX_9301_9201_EV11.11.15.03_FS11.01.00.00.75.ehd" or "CLX-92x1 93x1 Series_V6.P6.03.EC1512.10.hds" didn't work for a new HD.
What do you have?
Please let me know.
I solved the problem about the replacement of the HD, simply cloning it.
Ciao!

[wav]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

the firmwares i have are

Samsung CLX-92x1 93x1 Series_V6.P6.03.EC1512.10
CLX_9301_9201_EV11.11.13.36_FS11.01.00.00.55
rootfs.tar.gz
CLX_9301_9201_EV11.11.15.03_FS11.01.00.00.75

[crm-informatica.it]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

the firmwares i have are

Samsung CLX-92x1 93x1 Series_V6.P6.03.EC1512.10
CLX_9301_9201_EV11.11.13.36_FS11.01.00.00.55
rootfs.tar.gz
CLX_9301_9201_EV11.11.15.03_FS11.01.00.00.75

Hi, could you send me the rootfs.tar.gz file please? It seems to be the only file I don't have.
Really many thanks in advance

[shmaitlo]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

the firmwares i have are

Samsung CLX-92x1 93x1 Series_V6.P6.03.EC1512.10
CLX_9301_9201_EV11.11.13.36_FS11.01.00.00.55
rootfs.tar.gz
CLX_9301_9201_EV11.11.15.03_FS11.01.00.00.75

Dear I need HDD image of given below model , if you can provide i would be thankful to you.

Samsung CLX-92X1,93X1
Samsung SCX-8230,8240

thank you

[crm-informatica.it]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

Dear I need HDD image of given below model , if you can provide i would be thankful to you.

Samsung CLX-92X1,93X1
Samsung SCX-8230,8240

thank you

Hello, please let me know your email address by private message and I'll share whit you what I have.
Ciao

[Christophe Taormina]

Hi,
I also have the same problem as you, could you please send me the disk image you used to solve your problem?
My Printer is a Xpress C9201

Thanks in advance

[Christophe Taormina]

Re: CLX-9201 "Firmware update in progress..." message on black screen and nothing els

the firmwares i have are

Samsung CLX-92x1 93x1 Series_V6.P6.03.EC1512.10
CLX_9301_9201_EV11.11.13.36_FS11.01.00.00.55
rootfs.tar.gz
CLX_9301_9201_EV11.11.15.03_FS11.01.00.00.75

Just a quick message to thank WAV for their help! Thanks to him, after a long week of downtime, my printer is working again!
A thousand thanks WAV

[wav]

Just a quick message to thank WAV for their help! Thanks to him, after a long week of downtime, my printer is working again!
A thousand thanks WAV

not a problem. Just happy to help.