CP4525 error 58.04

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cscce
    Trusted Tech

    Site Contributor
    100+ Posts
    • Jun 2014
    • 156
    #1

    [Error Code] CP4525 error 58.04

    I have a HP CP4525 that is giving an error - 58.04. I have checked the items in the service manual (reseated connector J150 on the DCC and replaced the LVPS). Are there any other possible causes of this error?

    Thanks in advance.
    Tags: 58.04, cp4525, error, lvps
    • theengel
      Service Manager

      1,000+ Posts
      • Nov 2011
      • 1784
      #2
      Re: CP4525 error 58.04

      Does J150 go to the LVPS or something else?

        Comment

        • Lance15
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jun 2015
          • 1073
          #3
          Re: CP4525 error 58.04

          From the April 1, 2015 CPMD (Control Panel Message Document) document:

          58.04 ERROR: Reconnect the connector J150 on the DC controller PCA. If the message persists, replace the low-voltage power
          supply. If the issue persists, replace the DC controller PCA.

            Comment

            • cscce
              Trusted Tech

              Site Contributor
              100+ Posts
              • Jun 2014
              • 156
              #4
              Re: CP4525 error 58.04

              Sorry folks. I forgot to mention that the problem is fixed. The first replacement LV power supply was defective. The second worked perfectly.

                Comment

                Previous template Next
                Working...