Calibrate Hp color laserjet cp1215

[Dimpo]

Hi
I have an hp color laserjet cp1215 not calibrating colors.Margenta and Yellow are out of possition.I have tried more than 7 times to calibrate through Toolbox but in vain .I have serviced the machine still in vain.Is there anyone who knows how to solve this problem,?My email address is nrsmoyo@yahoo.com incase some one want to mail me the solution
Best Regards
Dimpo

[prntrfxr]

If you are experiencing blurry print or color misalignment when you print pq troubleshooting pages (in diagnostic menu), your problem is with color misregistration. Try the following:

1: Perform calibration (if you've done this go to 2).
2: Replace cartridges of the colors creating the problem. Good to print the error log as well (sometimes errors appear there that don't appear elsewhere.
3. Blow out the transfer belt especially the area where the color misregistration sensor is located. If it's dirty it may not be reading certain colors during calibration.
4. Replace transfer belt (ITB), since the color misregistration sensor may be defective.