[Error Code] HP p4014dn 58.04 error

[jasonblewis]

Hi,

I have 3 hp Laserjet p4014dn printers. I got hold of them in unknown condition and it turned out they were giving a fuser error whenever they tried to print. I purchased a reconditined fuser, not wanting to spend too much money to get them going.

Now i've tested the recoed fuser in 2 of the machines and both machines print about 5 pages before reporting error 58.04 and stopping mid print. If i clear the jam, power cycle the printer it will power up ok. I can then print again but it will jam again with the same 58.04 error every time. both machines I tried the recoed fuser in do this.

Could it be the recoed fuser is no good?

Any other ideas on how to fix these printers?

Thanks,

Jason

[Wild Bill]

Re: HP p4014dn 58.04 error

58.XX ERROR
To continue turn off then on
The environmental sensor (TH3) has
experienced an error.
1. Verify that the environmental sensor
connection at connector J63 on the
high-voltage power supply PCA is
securely seated.
2. If the error persists, replace the
environmental sensor (TH3).

[JustManuals]

Re: HP p4014dn 58.04 error

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com