Lexmark CX310dn Error 959.03 Invalid Firmware 1060 pnssverify

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alsid
    Technician
    • Sep 2010
    • 27
    #1

    [Error Code] Lexmark CX310dn Error 959.03 Invalid Firmware 1060 pnssverify

    Hello,
    I have an issue with a Photocopier Lexmark CX310dn, I performed an upgrade and failed, after that it appears an error code 959.03 Invalid Firmware. I can't access to service mode only in USB Recovery Mode. I used USB Flash Utility to flash it but seems that it's not working on Windows 10. The device its not appeared on USBflash2.0. I tried on Windows 7 but when I put the device on Recovery Mode requires driver for Lexmark T64x AIO that I can't find. Is there any way how to flash the device using Recovery Mode method.
    Any help will be appreciated.

    Cheers!
    Attached Files
    Tags: device, error, flash, mode, recovery
    • dalewb74
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2018
      • 1107
      #2
      Re: Lexmark CX310dn Error 959.03 Invalid Firmware 1060 pnssverify

      worst case you can revert back to the older version of the firmware. to see if that helps. fairly easy process, if you know the process.

        Comment

        • alsid
          Technician
          • Sep 2010
          • 27
          #3
          Re: Lexmark CX310dn Error 959.03 Invalid Firmware 1060 pnssverify

          Originally posted by dalewb74
          worst case you can revert back to the older version of the firmware. to see if that helps. fairly easy process, if you know the process.
          Thank you for your reply. I found it somewhere in web but never tried. Something with 2 and 8 while turn on.
          If you know how I can do it tell me cause I can't find it again.

            Comment

            Previous template Next
            Working...