User Profile
Collapse
-
Well that worked out a treat. Thanks for all the input! -
-
In that case running it as "Thick stock" could help. It slows down the machine some. The bypass does have a much larger feed contact area and...Leave a comment:
-
Sorry no experience with that. Just know color paper leaves lots of paper dust. If you can find high quality stock it should be fine. Running anything...Leave a comment:
-
Bizhub Press 6120 if you can find one. Else an 1100 or even a 951 in good condition will not disappoint. -
She should be good for some time to come. Thanks for the feedback.Leave a comment:
-
Allan, seccond question.
B&W production machine recommendation?
Ralph -
A used C558 or even better a C550i Konica Minolta come to mind if you are not planning on printing on tree stumps 240gsm plus. They are easy and cheap...Leave a comment:
-
Samstag, an meinem freien Tag, Bachgitarre spielen. Selbst zu meinem persönlichen vorteil arbeite ich unter der Woche zu hart, um auf Abruf zu sein....👍 1Leave a comment:
-
Loosing charge will do the opposite. Could be dev bias dropping. Guess its from the front of the machine to the back. Drum is causing a short on the HV...Leave a comment:
-
-
Is the thremistors touching the roller. A small air gap could cause it to over heat but by then a thermal fuse is suppose to be kicking in. I like the...Leave a comment:
No activity results to display
Show More
Leave a comment: